Tesla MCP Server

Streamable HTTP MCP server for Tesla vehicle control via the Tessie API.

Author: overment

[!WARNING]
You connect this server to your MCP client at your own responsibility. Language models can make mistakes, misinterpret instructions, or perform unintended actions. Always verify commands before execution, especially for actions like unlocking, opening trunks, or sending navigation destinations.

The HTTP layer is designed for convenience during development, not production-grade security. If deploying remotely, harden it: proper token validation, secure storage, TLS termination, strict CORS/origin checks, rate limiting, and audit logging.

Notice

This repo works in two ways:

• As a Node/Hono server for local workflows
• As a Cloudflare Worker for remote interactions

Features

• State Battery, range, location, climate, doors, charging status
• Commands Lock/unlock, climate, trunks, sentry, navigation
• Location-aware GPS coordinates for context-aware interactions
• Dual Runtime Node.js/Bun or Cloudflare Workers

Design Principles

• LLM-friendly: Two unified tools, not 1:1 API mirrors
• Watch-ready: Designed for AI agents with location context
• Secure: Tessie API key stored as secret, clients use separate bearer token
• Clear feedback: Detailed command results and vehicle state

---

Installation

Prerequisites: Bun, Tessie Account.

Ways to Run (Pick One)

1. Local Development Standard setup with bearer token auth
2. Cloudflare Worker (wrangler dev) Local Worker testing
3. Cloudflare Worker (deploy) Remote production

---

1. Local Development Quick Start

1. Get Tessie credentials:

   • Visit developer.tessie.com
   • Go to Developer Settings Generate Access Token
   • Copy your access token
   • Note your vehicle's VIN

2. Configure environment:

cd tesla-mcp
bun install
cp .env.example .env

Edit .env:

PORT=3000
AUTH_ENABLED=true
AUTH_STRATEGY=bearer

# Generate with: openssl rand -hex 32
BEARER_TOKEN=your-random-auth-token

# Tessie credentials
TESSIE_ACCESS_TOKEN=your-tessie-access-token
TESSIE_VIN=your-vehicle-vin

1. Run:

bun dev
# MCP: http://127.0.0.1:3000/mcp

Claude Desktop / Cursor:

{
  "mcpServers": {
    "tesla": {
      "command": "npx",
      "args": ["mcp-remote", "http://localhost:3000/mcp", "--transport", "http-only"],
      "env": { "NO_PROXY": "127.0.0.1,localhost" }
    }
  }
}

---

2. Cloudflare Worker (Local Dev)

bun x wrangler dev --local | cat

Create .dev.vars for local secrets:

BEARER_TOKEN=your_random_auth_token
TESSIE_ACCESS_TOKEN=your_tessie_token
TESSIE_VIN=your_vehicle_vin

Endpoint: http://127.0.0.1:8787/mcp

---

3. Cloudflare Worker (Deploy)

1. Create KV namespace for session storage:

bun x wrangler kv:namespace create TOKENS

Output will show:

Add the following to your wrangler.toml:
[[kv_namespaces]]
binding = "TOKENS"
id = "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"

1. Update wrangler.toml with your KV namespace ID:

[[kv_namespaces]]
binding = "TOKENS"
id = "your-kv-namespace-id-from-step-1"

1. Set secrets:

# Generate a random token for client authentication
openssl rand -hex 32
bun x wrangler secret put BEARER_TOKEN
# Paste the generated token when prompted

# Tessie API credentials
bun x wrangler secret put TESSIE_ACCESS_TOKEN
# Paste your Tessie token when prompted

bun x wrangler secret put TESSIE_VIN
# Paste your VIN when prompted

1. Deploy:

bun x wrangler deploy

Endpoint: https://<worker-name>.<account>.workers.dev/mcp

---

Client Configuration

Alice App

Add as MCP server with:

• URL: https://your-worker.workers.dev/mcp
• Type: streamable-http
• Header: Authorization: Bearer <your-BEARER_TOKEN>

Claude Desktop / Cursor (Local Server)

{
  "mcpServers": {
    "tesla": {
      "command": "npx",
      "args": ["mcp-remote", "http://127.0.0.1:3000/mcp", "--transport", "http-only"],
      "env": { "NO_PROXY": "127.0.0.1,localhost" }
    }
  }
}

Claude Desktop / Cursor (Cloudflare Worker)

{
  "mcpServers": {
    "tesla": {
      "command": "npx",
      "args": ["mcp-remote", "https://your-worker.workers.dev/mcp", "--transport", "http-only"]
    }
  }
}

MCP Inspector (Quick Test)

bunx @modelcontextprotocol/inspector
# Connect to: http://localhost:3000/mcp (local) or https://your-worker.workers.dev/mcp (remote)

---

Tools

tesla_state

Get the current state of your Tesla vehicle.

// Input
{}

// Output
{
  display_name: string;           // Vehicle name
  battery_level: number;          // 0-100%
  battery_range_km: number;       // Estimated range in km
  charging: {
    state: string;                // "Disconnected", "Charging", "Complete", "Stopped"
    minutes_remaining: number | null;
    charge_limit: number;         // Charge limit %
  };
  location: {
    latitude: number;
    longitude: number;
    heading: number;              // 0-359
    speed: number | null;         // km/h or null if parked
  };
  locked: boolean;
  sentry_mode: boolean;
  climate: {
    is_on: boolean;
    inside_temp: number;          // C
    outside_temp: number;         // C
    target_temp: number;          // C
    is_defrosting: boolean;
  };
  doors: {
    front_left: boolean;          // true = open
    front_right: boolean;
    rear_left: boolean;
    rear_right: boolean;
    frunk: boolean;
    trunk: boolean;
    charge_port: boolean;
  };
  state: "online" | "asleep" | "offline";
  odometer_km: number;
  last_updated: string;           // ISO 8601
}

tesla_command

Execute commands on your Tesla vehicle.

// Input
{
  command: "lock" | "unlock" | "start_climate" | "stop_climate" |
           "set_temperature" | "start_defrost" | "stop_defrost" |
           "open_frunk" | "open_trunk" | "open_charge_port" |
           "close_charge_port" | "enable_sentry" | "disable_sentry" |
           "flash" | "honk" | "share";
  temperature?: number;           // Required for set_temperature (15-28C)
  destination?: string;           // Required for share
  locale?: string;                // Optional for share (e.g., "en-US")
}

// Output
{
  success: boolean;
  command: string;
  message: string;
}

Commands Reference:

Command	Description	Parameters
lock	Lock the vehicle
unlock	Unlock the vehicle
start_climate	Start climate control
stop_climate	Stop climate control
set_temperature	Set cabin temperature	temperature (15-28C)
start_defrost	Turn on max defrost
stop_defrost	Turn off defrost
open_frunk	Open front trunk
open_trunk	Toggle rear trunk
open_charge_port	Open charge port door
close_charge_port	Close charge port door
enable_sentry	Enable sentry mode
disable_sentry	Disable sentry mode
flash	Flash the lights
honk	Honk the horn
share	Send destination to navigation	destination, locale?

---

Examples

1. Get vehicle state

{
  "name": "tesla_state",
  "arguments": {}
}

2. Lock the car

{
  "name": "tesla_command",
  "arguments": {
    "command": "lock"
  }
}

3. Set temperature to 22C

{
  "name": "tesla_command",
  "arguments": {
    "command": "set_temperature",
    "temperature": 22
  }
}

4. Start climate before leaving

{
  "name": "tesla_command",
  "arguments": {
    "command": "start_climate"
  }
}

5. Navigate to a destination

{
  "name": "tesla_command",
  "arguments": {
    "command": "share",
    "destination": "Golden Gate Bridge, San Francisco"
  }
}

---

Authentication Flow

  Client (Alice App, Claude Desktop)                             
                                                                
       Authorization: Bearer <BEARER_TOKEN>                     
                                                                
     
    Cloudflare Worker / Node.js Server                         
                                                               
    1. Validate BEARER_TOKEN (client auth)                     
    2. Use TESSIE_ACCESS_TOKEN (internal API key)              
                                                               
    env.TESSIE_ACCESS_TOKEN                                 
    env.TESSIE_VIN  TessieClient                
                                                             
                                                             
                                 api.tessie.com               
     

Key points:

• BEARER_TOKEN: Random token you generate authenticates clients to your MCP server
• TESSIE_ACCESS_TOKEN: Your Tessie API key used internally by the server
• Clients never see your Tessie credentials

---

HTTP Endpoints

Endpoint	Method	Purpose
/mcp	POST	MCP JSON-RPC 2.0
/health	GET	Health check

---

Development

bun dev           # Start with hot reload
bun run typecheck # TypeScript check
bun run lint      # Lint code
bun run build     # Production build
bun start         # Run production

---

Architecture

src/
 shared/
    tools/
        tesla-state.ts      # Get vehicle state
        tesla-command.ts    # Execute commands
 services/
    tessie.service.ts       # Tessie API client
 schemas/
    commands.ts             # Command definitions
    outputs.ts              # Tool output schemas
    tessie.ts               # Tessie API response schemas
 config/
    metadata.ts             # Server & tool descriptions
 index.ts                    # Node.js entry
 worker.ts                   # Workers entry

---

Environment Variables

Node.js (.env)

Variable	Required	Description
TESSIE_ACCESS_TOKEN		Tessie API access token
TESSIE_VIN		Tesla Vehicle VIN
BEARER_TOKEN		Auth token for MCP clients
PORT		Server port (default: 3000)
HOST		Server host (default: 127.0.0.1)
AUTH_ENABLED		Enable auth (default: true)
AUTH_STRATEGY		bearer (default)

Cloudflare Workers (wrangler.toml + secrets)

wrangler.toml vars:

AUTH_ENABLED = "true"
AUTH_STRATEGY = "bearer"

Secrets (set via wrangler secret put):

• BEARER_TOKEN Random auth token for clients
• TESSIE_ACCESS_TOKEN Tessie API access token
• TESSIE_VIN Your vehicle's VIN

KV Namespace:

[[kv_namespaces]]
binding = "TOKENS"
id = "your-kv-namespace-id"

---

Troubleshooting

Issue	Solution
401 Unauthorized	Check BEARER_TOKEN is set and client sends Authorization: Bearer <token>
"TESSIE_ACCESS_TOKEN not configured"	Set secret: wrangler secret put TESSIE_ACCESS_TOKEN
"TESSIE_VIN not configured"	Set secret: wrangler secret put TESSIE_VIN
"Tessie API error"	Verify TESSIE_ACCESS_TOKEN is valid at developer.tessie.com
Vehicle not found	Check TESSIE_VIN is correct (17 characters)
Vehicle offline	Vehicle may be in deep sleep. Commands will wake it (takes ~30s)
Command timeout	Tessie waits up to 90s for vehicle wake. Try again.
KV namespace error	Run wrangler kv:namespace create TOKENS and update wrangler.toml
"ReadableStream is not defined"	Node.js version too old (needs 18+). Use full path to newer node.
"spawn bunx ENOENT"	Claude Desktop can't find bunx. Use npx instead.

Debugging

Test with MCP Inspector:

bunx @modelcontextprotocol/inspector
# Connect to your endpoint and test tools

Check Worker logs:

wrangler tail

---

License

MIT